DTE Launches a EA-2000 Real-Time Elemental Analyser during Aluminium 2018

REYKJAVIK, Iceland–(BUSINESS WIRE)–Oct 8, 2018–DT Equipment ehf. (DTE) ( www.dtequipment.com ), a personality in a margin of in-line compositional research for a steel industry, will be presenting a EA-2000, a first-in-industry record for real-time control of aluminum processing, during a Aluminium 2018 World Trade satisfactory during Messe Düsseldorf, from 9-11 October, 2018.

“We are vehement to be exhibiting a ground-breaking attention resolution during Aluminum 2018”, commented Sveinn Gudmundsson, CEO of DTE, “We acquire aluminum producers and downstream processors to a mount 11G20 during a Norwegian and Icelandic Pavilion. We will be showcasing a intensity of a resolution to accommodate a hurdles of a aluminum smelting industry, with honour to optimizing metallurgical performance, cost-efficiency, capability and quality.”

Operating during a immeasurable scale, aluminum prolongation is a complex, high-tech and dangerous routine that involves estimate high-temperature glass metal. Throughout this routine a aluminum is sampled for component research to establish serve estimate requirements, to furnish steel of suitable virginity and composition. At present, sampling is achieved manually, by withdrawing a drain of fiery metal, permitting it to cold and afterwards transferring a expel representation to an on-site laboratory. This is steady many hundreds of times per day – a laborious, costly routine that delays a feedback loop of prolongation control information, heading to oversight and inefficiency.

DTE’s EA-2000 component analyser uses laser prompted relapse spectroscopy (LIBS) to yield an accurate real-time chemical research of a categorical component contaminants benefaction in a fiery aluminum, but contacting a aspect of a metal. No primer doing or laboratory measurements are required. Limit of showing (LOD) is good within operative operation for component research in a aluminum attention and blunder with honour to anxiety is rare for in situ analysis. While LIBS is used in a far-reaching operation of applications, a EA-2000 has been designed and constructed by DTE’s attention consultant group privately for continual operation in a oppressive conditions of an aluminum smelter and to take readings directly from a aspect of a fiery aluminum – a poignant challenge, around that a Company has patents pending.

“The EA-2000 compares really agreeably to customary laboratory OES research and a primer sampling routine it requires,” pronounced Kristjan Leosson, Ph.D., DTE’s Technical Director, who will be presenting a speak entitled during a Aluminium Forum during Messe Düsseldorf, during 16:30 on Wednesday, 10 October, 2018.

The DTE EA-2000 complements and aims to reinstate stream sampling methods for routine and peculiarity control, charity real-time routine feedback, estimable routine cost assets from faster, some-more revisit measurements and softened user reserve by expelling a need for tellurian intervention.


About DT Equipment

DTE, formed in Reykjavik, Iceland is focused on next-generation industrial steel prolongation routine control, towards Industry 4.0. The Company’s flagship DTE-EA product operation provides first-in-industry approach sampling and compositional research of fiery metal, addressing a high unmet need to element and reinstate stream slow, costly and primer methods for routine and peculiarity control with real-time, in-line research of snippet materials. Real-time routine feedback offers estimable opportunities, including softened prolongation efficiency, appetite and routine cost assets from faster, some-more revisit measurements and softened user reserve by tying a need for tellurian intervention.

For some-more information, greatfully revisit www.dtequipment.com

About Aluminium 2018

Aluminium 2018 in Düsseldorf is a world’s many critical trade satisfactory for a aluminum attention and a categorical focus fields, holding place each dual years. It is a general assembly indicate for aluminum manufacturers, processors, suppliers of semi-finished products, finished products and aspect treatment, with a whole value sequence from a tender element to semi-finished adult to finished product found underneath one roof.

For some-more information: www.aluminum-messe.com

Forward Looking Statements

All statements in this press release, other than statements of chronological fact are, or might be deemed to be, forward-looking statements. Forward-looking statements are statements of destiny expectations that are formed on management’s stream expectations and assumptions and engage famous and different risks and uncertainties that could means tangible results, opening or events to differ materially from those voiced or pragmatic in these statements. You should not place undue faith on forward-looking statements. Each forward-looking matter speaks usually as of a date of this presentation. The Company does not commence any requirement to publicly refurbish or correct any forward-looking matter as a outcome of new information, destiny events or other information. All forward-looking statements contained in this display are specifically competent in their entirety by a cautionary statements contained or referred to in this section.

View source chronicle on businesswire.com:https://www.businesswire.com/news/home/20181008005276/en/

CONTACT: DT Equipment ehf.

Karl Matthiasson

Chairman COO


Tel: (+354) 617 1326



SOURCE: DT Equipment ehf.

Copyright Business Wire 2018.

PUB: 10/08/2018 04:12 AM/DISC: 10/08/2018 04:12 AM


Share with your friends:
Share on FacebookShare on Google+Tweet about this on TwitterPin on PinterestShare on LinkedInShare on StumbleUpon

Leave a Reply

Your email address will not be published. Required fields are marked *